Squirrel Buster Product Guides

1. Push down and turn the lid to release.

2. Remove the lid from the feeder.

3. Pull the yellow cap from the centre of the feeder.

4. Disconnect the hanger cable from the feeder.

5. Remove the nut from underneath your feeder.

6. Pull out the tube from the centre of the feeder.

7. Finally, push the buttons. You should now be able to remove the seed tube..

1. To remove the lid, push down and turn counter clockwise.

2. Lift the cover up to remove it.

3. Pull the yellow cap in the middle of the tube up.

4. Disconnect the hanger cable.

5. Remove the nut at the bottom of the feeder.

6. Lift the tube.

7. Push the buttons to fully remove the tube.

8. That's it! You can now remove the tube.

1. Insert the shroud over the bottom section of your feeder.

2. Screw the wing nut on (clockwise).

3. Insert the skirt.

4. Insert the seed tube.

5. Attach and latch the hanger cover over the top of the feeder.

1. Disconnect the hanger from the feeder.

2. Disconnect and remove the seed tube.

3. Remove the outer skirt component.

4. Remove the bottom wing nut (counter clockwise).

5. Finally, remove the shroud that slots over the bottom section of the feeder.

1. Place your feeder on a level surface such as a table.

2. Lift the tube off the top of the feeder.

3. Unhook the hanger and tube from the top of the feeder.

4. Lift the metal cage off the peanut tube.

5. Fill the feeder from the top.

1. Place your feeder on a level surface such as a table.

2. Lift the tube off the top of the feeder.

3. Unhook the hanger and tube from the top of the feeder.

4. Lift the metal cage off the peanut tube.

5. Unscrew the stand from the bottom of the tube.

6. Slide the stand out from the center of the feeder tube.

1. Place the metal shroud over the feeder (you might want to fill it first!)

2. Take the hanger and insert the hooked end onto the top of the feeder.

3. Slide the green metal tube over the hanger hook.

4. That's it! Simply hang your feeder.

1. Lift up the metal tube over the hanger.

2. Unhook the feeder.

3. Lift the metal cage off the seed tube.

4. That's it! You can now either fill your bird feeder with seed, or clean it.

1. Add seed to your feeder, then slip the metal cover over the top of the seed tube.

2. Take the hanger and insert the hooked end onto the top of the feeder.

3. Slide the green metal tube over the hanger hook.

4. That's it! Simply hang your feeder.

1. Lift up the metal tube over the hanger.

2. Unhook the feeder.

3. Lift the metal cage off the seed tube.

4. That's it! You can now either fill your bird feeder with seed, or clean it.